Petaflare

Rent an RTX 4090 with crypto from $0.34 an hour

The cheapest card we rent, paid only in crypto, and still one of the most useful: 24 GB of GDDR6X for image generation, ComfyUI workflows, rendering and LLMs up to about 14B parameters.

Crypto-only payment, no card, no KYCUpdated 19 November 2026Prices checked 19 November 2026

You can rent an RTX 4090 on Petaflare for $0.34 per GPU-hour, $0.32 on the 1,200-hour Project block and $0.31 on the 4,000-hour Fleet block. The smallest purchase is 75 GPU-hours for $25.50. Each card is a whole RTX 4090 with 24 GB of GDDR6X, 1 to 8 per machine, with root SSH and a PyTorch, CUDA or Docker image. In 2026 it still handles SDXL, Flux in FP8, ComfyUI pipelines and 8B models in BF16; for bigger models, see the 32 GB RTX 5090.

RTX 4090 specs

Ada Lovelace, the same generation as the L40S, in a consumer card. Its fourth-generation Tensor Cores support FP8, and it keeps RT cores and two AV1 video encoders.

Architecture
Ada Lovelace
Memory
24 GB GDDR6X
Memory bandwidth
1,008 GB/s
BF16 Tensor (dense)
not published as a Tensor figure for GeForce
FP8 Tensor (dense)
supported (4th-gen Tensor Cores)
Board power
450 W
GPU link
PCIe Gen4, no NVLink
Form factor
PCIe
CUDA cores
16,384 CUDA cores

CUDA cores, memory and board power from NVIDIA's RTX 4090 page. Memory bandwidth is worked out from its 21 Gbps GDDR6X on a 384-bit bus.

RTX 4090 cloud prices

One RTX 4090, as listed on each provider's pricing page on 19 November 2026.

Sources: RunPod, Salad, Vast.ai public price feed (18 November median, cited with attribution). Read on 19 November 2026. Every card is on the full price list.
ProviderPrice typePer GPU-hour
PetaflareFixed, on demand$0.34 · $0.31 on Fleet
RunPod Secure CloudFixed, on demand$0.89
RunPod Community CloudThird-party hosts$0.34
SaladHigh priority · lowest priority (interruptible)$0.44 · $0.16
Vast.aiMarketplace, median of the day$0.36

Sources: RunPod, Salad, Vast.ai public price feed (18 November median, cited with attribution). Read on 19 November 2026. Every card is on the full price list.

Reading those RTX 4090 prices

Our $0.34 matches RunPod's Community Cloud and sits below the Vast.ai median and Salad's high-priority tier, at less than 40% of RunPod's Secure Cloud price. Salad's lowest tier is cheaper at $0.16, but those machines can be taken back at any time, which suits batch jobs that can restart. Ours are not interruptible: nobody takes the card back while you have hours.

Paying for RTX 4090 hours in crypto

Seventy-five RTX 4090 hours cost $25.50, the cheapest block on the site, and 4,000 hours cost $1,240, or $0.31 an hour. Monero keeps the payment private and is credited after 10 confirmations, about 20 minutes. Crypto is the only way to pay and no card or ID is asked: see the Monero GPU server page.

Is the RTX 4090 still good in 2026?

For most image and small-model work, yes. What has changed since its 2022 launch is model size, not the card's speed, so the answer depends on whether your job fits in 24 GB:

  • Stable Diffusion 1.5 and SDXL: comfortably, with batch generation and LoRA training. See the Stable Diffusion GPU guide for the memory per model.
  • Flux.1: the 12-billion-parameter model takes about 24 GB in BF16, too much with its text encoder, but runs well with FP8 weights.
  • ComfyUI pipelines: most workflows fit; heavy video workflows need FP8 models or offloading. Our ComfyUI setup guide shows how to run it on a rented card.
  • LLMs: 8B models in BF16, 14B in 8-bit, around 30B in 4-bit with short contexts. Beyond that you need more memory.
  • Rendering: Blender Cycles with OptiX, Redshift and Octane run well thanks to its RT cores; see cloud GPU rendering.

What fits in 24 GB

Weights take 2 bytes per parameter in BF16, 1 in FP8 or 8-bit and about 0.5 in 4-bit, before activations and cache.

Rules of thumb; measure your own job on a Burst block before buying more hours.
JobMemory neededRTX 4090 (24 GB)
SDXL image generationAbout 8 to 12 GBYes, with batches
Flux.1 dev in BF16 with its text encoderMore than 24 GBNo: use FP8 weights
Flux.1 dev in FP8About 12 GB plus the encoderYes
Llama 3.1 8B in BF16About 16 GB plus cacheYes
A 14B model in 8-bitAbout 14 GB plus cacheYes
A 32B model in 4-bitAbout 18 to 20 GBYes, short contexts
A 70B model in 4-bitAbout 35 to 40 GBNo: L40S, A100 or H100

Rules of thumb; measure your own job on a Burst block before buying more hours.

RTX 4090 or RTX 5090

The RTX 5090 costs $0.49 an hour, 44% more, for 32 GB instead of 24 GB, about 78% more memory bandwidth (1,792 GB/s against 1,008 GB/s) and FP4 support. Pick the 5090 when a model does not fit in 24 GB or when memory speed limits you, as in LLM serving. Stay on the 4090 when the job fits: for SDXL batches or most renders, the cheaper card often gives more images or frames per dollar.

Rent or buy an RTX 4090?

Divide the price of a card by the hourly rate. If an RTX 4090 cost you $2,000, that money buys about 5,880 hours here at $0.34, or 6,450 hours at the Fleet rate: roughly eight to nine months of one card running day and night. Owning also means a host machine, power and cooling. Renting makes sense for projects that come and go, for testing before you buy, or when you need several cards for a short time.

RTX 4090 rental questions

How much does it cost to rent an RTX 4090?

$0.34 per GPU-hour on Petaflare, $0.32 on the 1,200-hour block and $0.31 on the 4,000-hour block. The smallest block is 75 GPU-hours for $25.50.

Is the RTX 4090 good for Stable Diffusion?

Yes. SDXL runs comfortably in 24 GB, including LoRA training; Flux needs FP8 weights to fit with its text encoder.

Can I run an LLM on a rented RTX 4090?

Models up to about 8B in BF16, 14B in 8-bit or 30B in 4-bit. For 70B models, rent a card with 48 GB or more.

Can I mine cryptocurrency on it?

No. Mining is not allowed on any Petaflare instance; the acceptable use policy lists every rule.

Sources