RunPod alternative: fixed GPU prices, paid in crypto, no KYC
Petaflare is a GPU cloud paid only in crypto and one of the alternatives on this page, so weigh what follows with that in mind. Every RunPod fact below comes from RunPod's own pricing and billing pages, read on 19 November 2026.
Yes, there are cheaper RunPod alternatives, depending on which RunPod you compare with. On 19 November 2026, Petaflare's fixed prices were 17% to 65% below RunPod's Secure Cloud on all seven cards we rent, paid in crypto with no identity check. Against RunPod's Community Cloud we were cheaper on the RTX 5090, A100, H100 SXM, H200 and B200, equal on the RTX 4090, and dearer on the L40S and H100 PCIe. For the lowest price at any cost, Vast.ai's marketplace is usually cheaper still; for serverless endpoints, RunPod itself remains the stronger choice.
RunPod and Petaflare prices, card by card
One GPU, per hour, on 19 November 2026. RunPod's Secure Cloud runs in partner data centers at fixed prices; its Community Cloud runs on third-party hosts.
| GPU | Petaflare | RunPod Secure Cloud | RunPod Community Cloud | Petaflare vs Secure Cloud |
|---|---|---|---|---|
| RTX 4090 | $0.34 | $0.89 | $0.34 | 62% less |
| RTX 5090 | $0.49 | $1.39 | $0.69 | 65% less |
| L40S | $0.87 | $1.09 | $0.79 | 20% less |
| A100 80GB | $0.99 | $2.09 PCIe · $2.19 SXM | $1.19 PCIe · $1.39 SXM | 53% less than PCIe |
| H100 80GB | $2.39 | $2.89 PCIe · $4.39 SXM | $1.99 PCIe · $2.69 SXM | 17% less than PCIe, 46% less than SXM |
| H200 141GB | $3.29 | $5.29 | $3.59 | 38% less |
| B200 180GB | $4.89 | $7.99 | $5.98 | 39% less |
Sources: RunPod pricing (page dated 12 November 2026) and our cloud GPU pricing. Our H100s may be SXM or PCIe, so the comparison uses RunPod's cheaper PCIe price. Our Fleet blocks take about 10% more off. For other providers, see the lowest price per GPU.
What RunPod does
RunPod rents GPU pods, containers with one or more GPUs, in two clouds: Secure Cloud in partner data centers at fixed prices, and Community Cloud on third-party hosts for less. It also sells Serverless GPU endpoints that scale with traffic, multi-node Clusters, and network storage from $0.05 per GB a month. Compute and storage are billed per second with no data transfer fees, and new users can start with $10.
Why people look for a RunPod alternative, starting with crypto
These come from RunPod's billing documentation, not from reviews:
- Identity checks before crypto. RunPod takes crypto through payment processors, and asks you to complete any required KYC before your first crypto payment. Petaflare never asks who you are.
- Credits cannot be refunded. RunPod credits are non-refundable and cannot be withdrawn once deposited. Here, unused GPU-hours never expire, and the hours of an instance that fails on our side come back.
- Data when the balance runs out. When your RunPod balance is empty, running pods stop, and a pod without a network volume is terminated with its data. When your Petaflare hours run out, the machine stops and its disk is kept.
- Secure Cloud prices. Fixed, data-center capacity on RunPod costs 17% to 65% more than ours on the same cards.
- Prepaid cards. RunPod asks for at least $100 per transaction on a prepaid card. We take no cards at all, only crypto.
If price alone is the reason, compare both of RunPod's clouds with Vast.ai on RunPod or Vast.ai before you move.
Where RunPod is the better choice
- Serverless endpoints. RunPod scales inference workers with traffic. We rent whole machines only.
- Short experiments. Per-second billing from a $10 start beats our smallest block, which costs $25.50 to $29.70 depending on the card.
- Instant start. RunPod pods start on their own; our machines are prepared by a person, so they take longer.
- Community Cloud on two cards. Its L40S at $0.79 and H100 PCIe at $1.99 are below our $0.87 and $2.39.
- Storage that moves. Network volumes can be attached to a new pod in the same data center, and RunPod charges nothing for data transfer.
- More GPU models and card payments. RunPod lists more cards than our seven, and takes cards and, above $5,000, invoices.
If any of these is what you need, staying on RunPod is reasonable.
Other RunPod alternatives
One H100 on demand, per GPU-hour, on 19 November 2026, with the payment each provider documents. The full list is on cloud GPU providers compared.
| Provider | Best for | One H100 | Paying |
|---|---|---|---|
| Petaflare | Fixed prices without a card or an ID check | $2.39 | Crypto only |
| Vast.ai | The lowest price, host by host | $1.33 median (SXM) | Card; crypto through BitPay and Crypto.com |
| Lambda | Clusters and reserved capacity | $4.89 (SXM) | Major credit card |
| DigitalOcean | AMD Instinct GPUs, per-second billing | $4.41 (HGX) | Card |
| Thunder Compute | Low fixed A100 price, per-minute billing | $3.20 (SXM) | Not stated on its pricing page |
| Massed Compute | Bandwidth included in the price | $3.14 (SXM5) | Not stated on its pricing page |
| Salad | Interruptible batch jobs on consumer GPUs | No H100 | Not stated on its pricing page |
Vast.ai's figure is the 18 November median from its public price feed, cited with attribution. How Vast.ai fees add up covers its storage and bandwidth charges.
Moving a RunPod workload
A pod is a container, so most RunPod workloads move in three steps: bring the same image, copy the data, and check the drivers.
- Image. Start our machine from your own Docker image, or from our PyTorch or CUDA image and install your requirements.
- Data. Pack what you need from
/workspace, where RunPod mounts its volumes, and pull it over SSH to the new machine. - Check. Run
nvidia-smiand your framework's CUDA check before starting a long job.
# On the RunPod pod: pack the project from the volume
tar -czf /workspace/project.tgz -C /workspace project
# On the new machine: pull it over SSH (use the pod's public IP and SSH port)
rsync -avP -e "ssh -p <port>" root@<pod-ip>:/workspace/project.tgz ~/
tar -xzf ~/project.tgz -C ~/
# Check the GPU and CUDA before a long run
nvidia-smi
python -c "import torch; print(torch.cuda.is_available(), torch.version.cuda)"Is RunPod reliable?
We have no independent uptime figures for RunPod, or for anyone else, and will not guess. The difference that matters is between its two clouds: Secure Cloud runs in partner data centers, while Community Cloud runs on third-party hosts whose quality varies from one to the next. On any provider, long jobs should save checkpoints, and on RunPod, data you want to keep belongs on a network volume.
RunPod alternative questions
How expensive is RunPod?
On 19 November 2026, one H100 cost $2.89 an hour (PCIe) or $4.39 (SXM) on Secure Cloud, and $1.99 or $2.69 on Community Cloud. An RTX 4090 cost $0.89 or $0.34. Storage is billed on top, from $0.05 to $0.20 per GB a month depending on the type.
Can I pay RunPod in crypto without KYC?
RunPod's billing documentation asks you to complete any required KYC before your first crypto payment. Petaflare takes crypto with no identity check at any step.
Are RunPod credits refundable?
No. RunPod says its credits are non-refundable and cannot be withdrawn. Our GPU-hours never expire, and the refund policy covers hours lost to a failure on our side.
Does Petaflare have serverless endpoints like RunPod?
No. We rent whole machines with 1 to 8 GPUs and root SSH, billed per minute from prepaid hours. For autoscaling inference endpoints, RunPod is the better fit.
Sources
- RunPod pricingread 19 November 2026
- RunPod, billing documentationread 19 November 2026
- Vast.ai public GPU price feedread 19 November 2026
- Lambda pricingread 19 November 2026
- DigitalOcean GPU Droplet pricingread 19 November 2026
- Thunder Compute pricingread 19 November 2026
- Massed Compute pricingread 19 November 2026